N-(4-aminobutan-2-yl)carbamic acid tert-butyl ester

N-(4-aminobutan-2-yl)carbamic acid tert-butyl ester - Names and Identifiers

Name	(3-AMINO-1-METHYL-PROPYL)-CARBAMIC ACID TERT-BUTYL ESTER
Synonyms	3-BOC-AMINO-BUTYLAMINE 3-Boc-amino-1-butylamine tert-butyl (4-aminobutan-2-yl)carbamate N-(4-aminobutan-2-yl)carbamic acid tert-butyl ester (3-AMINO-1-METHYL-PROPYL)-CARBAMIC ACID TERT-BUTYL ESTER (3-Amino-1-methylpropyl)carbamic acid 1,1-dimethylethyl ester (3-amino-1-methylpropyl)-Carbamic acid, 1,1-dimethylethyl ester Carbamic acid, (3-amino-1-methylpropyl)-, 1,1-dimethylethyl ester (9CI)
CAS	177489-90-6

N-(4-aminobutan-2-yl)carbamic acid tert-butyl ester - Physico-chemical Properties

Molecular Formula	C9H20N2O2
Molar Mass	188.27
Storage Condition	2-8°C(protect from light)

N-(4-aminobutan-2-yl)carbamic acid tert-butyl ester - Introduction

(3-AMINO-1-METHYL-PROPYL)-CARBAMIC ACID TERT-BUTYL ESTER is an organic compound with the chemical formula C10H21NO2. Its properties are as follows:

1. Appearance: colorless liquid
2. Solubility: soluble in organic solvents, insoluble in water
3. Melting Point:-60 ℃
4. Boiling point: 200-205 ℃
5. Density: 0.965 g/mL
6. Refractive index: 1.44

The compound has a certain pungent odor and steam and should be operated with caution. Its main uses are as follows:

1. Chemical synthesis: as an organic synthesis intermediate, used in the synthesis of chain extenders, antioxidants, photoinitiators, etc.
2. Polymer additives: can be used as polyurethane, polyester, polypropylene and other plasticizers, stabilizers and antioxidants.
3. Dyes and inks: can be used as synthetic raw materials for pigments and dyes, and can also be applied to inks and coatings.

In terms of preparation, a common method is obtained by reacting tert-butyl carbamic acid with 3-amino -1-methyl propanol. The preparation process of (3-AMINO-1-METHYL-PROPYL)-CARBAMIC ACID TERT-BUTYL ESTER is relatively simple, but it is necessary to pay attention to operational safety measures to avoid contact with skin and inhalation of vapors.

Regarding safety information, the compound has a certain degree of irritation and may have an irritating effect on the eyes and skin. Wear protective goggles, gloves and a protective mask during operation to ensure a well-ventilated laboratory environment. If skin or eye irritation occurs, rinse immediately with plenty of water and seek medical help. In addition, it should be stored in a cool, dry place, away from open flames and heat sources.

Last Update：2024-04-10 22:29:15